I-PTFE Hose End eNgqoyo iFakela uMnyama kwi-PTFE Hose Kuphela

Inkcazelo emfutshane:

Ufakelo lombhobho we-PTFE ngokobungakanani obahlukeneyo kunye nee-engile ukukunika olona luhlu lubanzi lokhuselo lweemfuno zakho zemibhobho yamanzi.

 

Inombolo yomzekelo 46 uthotho (Ngqo)
Inkcazo I-PTFE ifanelekile
Uluhlu lwamaxabiso (EXW) $1.1-$3.0
Ubungakanani AN3/AN4/AN6/AN8/AN10
Umbala Mnyama&Mnyama/Obomvu&Blowu/Obomvu&Mnyama
Izinto eziphathekayo I-Aluminiyam 6061-T6
Uhlobo lwesiqhagamshelo Uhlobo lweTeflon
Min.Order Ubungakanani IiPC ezili-100
Ubunzima 10G/14G/22G/39G/55G
Iphakheji I-1PC / isikhwama se-opp, i-50pcs / isikhwama sangaphakathi
Immimiselo yokuhlawula T/T, L/C
FOB Port Izibuko laseNingbo

Iinkcukacha zeMveliso

Iithegi zeMveliso

* Ukuchazwa kwemveliso

I-CSA (1)

* Iimbonakalo

I-stainless steel braided PTFE AN hose isebenzisa umnquma ohambelana nokuphela komgca we-PTFE ngononophelo oluthathiweyo ukuze kuqinisekiswe ukuba yonke i-braid yensimbi engenasici ihlala ngaphandle komnquma kwaye ingabanjwa.I-nut yokukhusela idonsa le nto iqinile ukuya ekupheleni kombhobho kwaye kwangaxeshanye ivala umnquma kancinci ukutywina i-PTFE liner kwisiphelo se-hose.46 uthotho lwemibhobho yokulinganisa isiphelo imiyalelo Inyathelo loku-1
Gquba i-masking tape ujikeleze indawo ukuze unqumle kwaye uphawule indawo ngqo apho kufuneka kube khona ukusikwa.Kukho iindlela ezininzi zokusika ithumbu - i-hose shears, i-disc cutter ene-blade 'slitter' emxinwa okanye i-hacksaw encinci enencakuba enamazinyo.Kubalulekile ukuba i-hose isikwe isikwere kwaye iqonde.Ukuba usebenzisa i-Junior Hacksaw musa ukwenza uxinzelelo okanye ukuphoswa kwe-braiding kunokuphazamiseka.Nawaphi na amaqhekeza ophothiweyo anokusikwa ngasemva ngeziqwenga.Susa nayiphi na i-burrs ekupheleni kombhobho ngemela efanelekileyo kwaye uqinisekise ukuba icocekile kwaye ingqukuva.
Inyathelo lesi-2
Qinisekisa ukuba umbhobho ungqukuva ngokucudisa ngobunono ngeepliers.Kweli nqanaba tyibilikisa i-hose end socket nut phezu kombhobho.Faka isiphelo sombhobho kumbhobho we-PTFE ukuqinisekisa ukuba i-ID ingqukuva.Susa isiphelo se-hose kunye ne-masking tape.
Inyathelo lesi-3
Ukusebenzisa isikrufu esincinci somqhubi okanye chola ukwandisa ngobunono intsimbi ephothiweyo ephothiweyo kude netyhubhu ye-PTFE yonke indlela.Ukunyamekela kufuneka kuthathwe ukuqinisekisa ukuba ityhubhu ye-PTFE ayonakaliswa nangayiphi na indlela.
Inyathelo lesi-4
Tshala umnquma/iferrule ekupheleni kombhobho naphantsi kwebraid, qinisekisa ukuba akukho kulukwa phakathi kombhobho nomnquma/iferrule.Gqibezela indawo yomnquma/iferrule ngokuyityhala ngokulinganayo kwindawo ethe tyaba efana neqhekeza lomthi njengoko ingayi kuphawula okanye yonakalise i-ferrule.Hlola ukuqinisekisa ukuba i-tube butts up squarely kwaye
ngokupheleleyo kwigxalaba langaphakathi le-ferrule.
Inyathelo lesi-5
Thambisa imisonto kumbhobho wesiphelo kunye nendongomane yesokethi kwaye uthambise i-hose end nipple.Faka isiphelo sombhobho kumbhobho ngokubamba umbhobho kwaye utyhale i-hose end nipple kwityhubhu ngesenzo sokutyhala / ukujija de idityaniswe ngokupheleleyo.
Inyathelo lesi-6
Bamba i-nut ye-socket kwimihlathi ye-vice kwaye, ugcine isikwere sendibano, qalisa ukubandakanya i-socket kunye ne-hose end threads.Kuya kwenzeka ukubandakanya ukujika okwaneleyo ukuqinisekisa ukuba imisonto ilungelelaniswe ngokuchanekileyo.
Inyathelo lesi-7
Qinisa isiphelo sombhobho kwisokethi usebenzisa isipanela sobukhulu obuchanekileyo.Qinisekisa ukuba kukho ioli kwimisonto njengoko uqinisa umanyano.Qinisa isiphelo sombhobho kwisokethi de ube nesithuba esimalunga ne-1mm.Lungelelanisa iiflethi ukugqiba ubuchwephesha.


  • Ngaphambili:
  • Okulandelayo:

  • Bhala umyalezo wakho apha kwaye uwuthumele kuthi